3D Printing Materials
Written by：XH Yang
Date：Saturday, October 19, 2019 4:55 PM
Desktop 3D Printing Material
Material | Model | Process | Precision （mm） | Finest Printable Feature （mm） | Wall Thickness （mm） | Finishing |
PLA | / | FDM | ±0.2 | 0.5 | 1 | Wavy Surface |
Industrial-Grade 3D Printing Photopolymer
Material | Model | Process | Precision （mm） | Finest Printable Feature （mm） | Wall Thickness （mm） | Finishing |
Photopolymer | 8119 | SLA | ±0.1 | 0.3 | 0.8 | Wavy Surface |
Photopolymer | 9000 | SLA | ±0.1 | 0.3 | 0.8 | Smooth |
Transparent Photopolymer | 10122 | SLA | ±0.1 | 0.3 | 0.8 | Smooth |
HighResolution Photopolymer | 128 | SLA | ±0.1 | 0.3 | 0.8 | Smooth |
HighTem Photopolymer（70C） | 8000 | SLA | ±0.1 | 0.3 | 0.8 | Smooth |
HighTem Photopolymer（100C） | 8001 | SLA | ±0.1 | 0.3 | 0.8 | Smooth |
HighTem Photopolymer（280C） | LY8002 | SLA | ±0.1 | 0.15 | 0.8 | Smooth |
Industrial 3D Printing Plastic
Material | Model | Process | Precision （mm） | Finest Printable Feature （mm） | Wall Thickness （mm） | Finishing |
Nylon | HP PA12 | MJP | ±0.15 | 0.4 | 1 | Slightly Frosted |
Nylon | PA12 | SLS | ±0.15 | 0.5 | 1 | Slightly Frosted |
Nylon | HP PA12+FG | MJP | ±0.15 | 0.4 | 1 | Slightly Frosted |
Nylon+Glass | PA12%+30%GF | SLS | ±0.15 | 0.4 | 1 | Slightly Frosted |
TPU | / | SLS | ±0.3 | 0.6 | 1 | Smooth |
PC | / | FDM | ±0.2 | 0.5 | 1 | Wavy Surface |
ABS | ABS-M30 | FDM | ±0.2 | 0.5 | 1 | Wavy Surface |
PPSF | / | FDM | ±0.2 | 0.5 | 1 | Wavy Surface |
ULTEM | 9085 | FDM | ±0.2 | 0.5 | 1 | Wavy Surface |
ASA | / | FDM | ±0.2 | 0.5 | 1 | Wavy Surface |
PEEK | / | FDM | ±0.2 | 0.5 | 1 | Wavy Surface |
High Performance Composite Photosensitive Material
Material | Model | Process | Precision （mm） | Finest Printable Feature （mm） | Wall Thickness （mm） | Finishing |
Rubber-like | Tango Series | polyjet | ±0.3 | 0.6 | 1 | Smooth |
Rigid Transparent Photopolymer | VeroClear Series | polyjet | ±0.1 | 0.3 | 0.8 | Smooth |
Touph Photopolymer | Vero Series | polyjet | ±0.1 | 0.3 | 0.8 | Smooth |
PP Like | CURE430 | polyjet | ±0.2 | 0.5 | 1 | Smooth |
3D Printing Wax Material
Material | Model | Process | Precision （mm） | Finest Printable Feature （mm） | Wall Thickness （mm） | Finishing |
Red Wax | RC90 | SCP | ±0.3 | 0.6 | 1 | Smooth |
Blue Wax | 3Zmodel | SCP | ±0.3 | 0.6 | 1 | Smooth |
3D Printing Metal Materials
Material | Model | Process | Precision （mm） | Finest Printable Feature （mm） | Wall Thickness （mm） | Finishing |
Stainless Steel | 316L | SLM | ±0.1 | 0.2 | 0.5 | Slightly Frosted |
Titanium Alloy | Tl6A14V | SLM | ±0.1 | 0.2 | 0.5 | Slightly Frosted |
Aluminum Alloy | AlSi10Mg/AlSi12 | SLM | ±0.1 | 0.2 | 0.5 | Slightly Frosted |
Do you want to learn more from us?
Leave your email address and we will
contact you within 24 hours.
